Probes, Tips & Holders
Capacitance Free Length Gage

Probe tips protect your probe and gather more precise measurements with tips that match your spring diameter.

Extremely accurate length measurement
English and metric versions
Highly customizable and adjustable holders

Pitch Adjust Motors

Probes with armored cabling and temperature stabilization ensure an accurate free-length reading. Probe tips protect your probe and gather more precise measurements with tips that match your spring diameter. The probe holder… holds the probe.

Probe Tip Selection

Spring Coil Diameter	Regular Tip Size	Extended Tip Size
0.125″ (3.1 mm) and smaller	Use probe without tip	1/8″ (3 mm)
0.125″ (3.1 mm) – 0.250″ (6.3 mm)	1/4″ (6 mm)	1/4″ (6 mm)
0.250″ (6.3 mm) – 0.375″ (10.5 mm)	5/8″ (16 mm)	3/8″ (10 mm)
0.375″ (10.5 mm) – 0.625″ (16.8 mm)	5/8″ (16 mm)	5/8″ (16 mm)
0.625″ (16.8 mm) – 1″ (25.4 mm)	1″ (25 mm)	1″ (25 mm)
1″ (25.4 mm) – 1.5″ (38.1 mm)	1.5″ (38 mm)	None
1.5″ (38.1 mm) – 2″ (50.8 mm)	2″ (51 mm)	None

Ordering Information

Probes

The PX595G heated probe features temperature stabilized electronics for drift-free measurement when used with a Tiger, Panther, Lynx or modified 300-9EX gage. LION probes are the industry’s only armored-cable probes; especially important on the spring manufacturer’s shop floor.

The probe can be used on any model Lion gage, but older models will not take advantage of the probe’s temperature stabilization.

Description	Part Number
PX595G Heated Probe (English)	025-0000-0658-02	Get a Quote
PX595G Heated Probe (Metric)	025-0000-0658-03	Get a Quote
Rebuild your old probe	100-0000-0009-00	Get a Quote

Extended Probe Tips

These tips match the sensing surface size to the spring diameter. They also prevent potential damage to the probe itself from cutoff springs. Kits include one screw-on base and one of each size screw-in tip. Tips include a low-profile locking nut to prevent loosening from vibration.

Description	Part Number
Extended Probe Tip - 1/8 X 1", Threaded (3 x 25 mm)	018-0000-2535-00	Get a Quote
Extended Probe Tip - 1/4 X 1", Threaded (6 x 25 mm)	018-0000-2531-00	Get a Quote
Extended Probe Tip - 3/8 X 1", Threaded (9 x 25 mm)	018-0000-2532-00	Get a Quote
Extended Probe Tip - 5/8 X 1", Threaded (16 x 25 mm)	018-0000-2533-00	Get a Quote
Extended Probe Tip - 1 X 1", Threaded (25 x 25 mm)	018-0000-2534-00	Get a Quote
Extended Probe Tip - Base Assembly, Threaded	025-0000-0654-00	Get a Quote
Extended Probe Tip - Kit (1 Base & 5 Tips) Extended Probe Tip Kit – 1 Base & 5 Tips 025-0000-0655-00 1 Base Assembly with 5 Tips included (sizes 1/8″, 1/4″ 3/8″, 5/8″ & 1″)	025-0000-0655-00	Get a Quote
Probe Tip Assembly, 1/8" diameter	025-0000-0631-00	Get a Quote
Probe Tip Assembly, 1/4" diameter	025-0000-0631-01	Get a Quote
Probe Tip Assembly, 3/8" diameter	025-0000-0631-02	Get a Quote
Probe Tip Assembly, 5/8" diameter	025-0000-0631-03	Get a Quote
Probe Tip Assembly, 1" diameter	025-0000-0631-04	Get a Quote
Extended Probe Tip - Kit (5 single piece assemblies) Extended Probe Tip Kit – 5 Single Piece Assemblies 025-0000-0655-01 5 assemblies sizes 1/8″, 1/4″ 3/8″, 5/8″ & 1″	025-0000-0655-01	Get a Quote

Guarded Probe Tips

These tips provide the greatest accuracy, reduced interference from tooling, and allow for tip sizes of over one inch.

Description	Part Number
Guarded Probe Tip - 5/8" Dia. (16 mm)	025-0000-0597-03	Get a Quote
Guarded Probe Tip - 1.0" Dia. (25 mm)	025-0000-0597-00	Get a Quote
Guarded Probe Tip - 1.5" Dia. (38 mm)	025-0000-0597-01	Get a Quote
Guarded Probe Tip - 2.0" Dia. (52 mm)	025-0000-0597-02	Get a Quote

Probe Holders

Description	Part Number
PB309B - Fixed Probe Holder PB309B – Fixed Probe Holder This probe holder mounts to the coiler face to position the probe for measurement. The single locking handle makes position adjustment easy.	025-0000-0640-00	Get a Quote
Manual Swing-Away Probe Holder Manual Swing-Away Probe Holder A productivity improvement over the PB309. Only do setup once; no more needless setups after minor tooling adjustments! Retract to allow unrestricted access to the forming tooling, and when finished, the Swing-Away Probe Holder can quickly and precisely be returned to the measure position. The Swing-Away Probe Holder uses the same bolt pattern as the PB309 Probe Holder, making for easy upgrading.	025-0000-0679-00	Get a Quote
RP2 - Retractable Probe Holder RP2 – Retractable Probe Holder This probe holder retracts the probe during cutoff of large springs. The system is completely powered and triggered by the gage. The air powered actuator is a sleek, concentric cylinder design for reliable high-speed operation up to two strokes per second.	025-0000-0573-00	Get a Quote