The Capacitance Free Length Driver is a self contained system for driving the non-contact probe.
- Modular system design
- Designed for coiler manufacturers
- VDC length feedback signal to your CNC control
Capacitance Free Length Gage
Capacitance Free Length Gage
The Capacitance Free Length Driver is a self contained system for driving the non-contact probe. The driver electronics produce an output voltage, which is proportional to the length of the spring at the probe. Longer springs (closer to the probe) produce more positive output voltages.
The output voltage offset must be adjusted to near zero for a nominal length spring. Probe Zero adjustments can be made by a Digital to Analog Converter output voltage from the users data acquisition system or by a ten-turn potentiometer that can be purchased with the system.The probe driver is mounted with two screws (M3-0.5). Do not loosen or remove the probe connector nut. See Figure 3 for panel cutout specifications. The maximum depth of the threaded mounting holes is 9.5mm (3/8 inch).
Ordering Information
Gage
| Description | Part Number | |
|---|---|---|
| Capacitance Free Length Gage (PC interface not included) | 050-0000-0128-00 | Get a Quote |
PC Interface
| Description | Part Number | |
|---|---|---|
| PC Analog Interface Card, PCI Bus | 014-3000-0007-00 | Get a Quote |
| Capacitance Free Length Gage - Sample Code | 025-0000-0571-00 | Get a Quote |
Driver
| Description | Part Number | |
|---|---|---|
| Capacitance Free Length Driver | 025-1000-0479-00 | Get a Quote |
| Computer Cable Assembly | 025-1000-0429-00 | Get a Quote |
| Zero POT Cable Assembly | 025-1000-0430-00 | Get a Quote |
Probes
| Description | Part Number | |
|---|---|---|
| PX595G Heated Probe (English) | 025-0000-0658-02 | Get a Quote |
| PX595G Heated Probe (Metric) | 025-0000-0658-03 | Get a Quote |
Probe Tips
| Description | Part Number | |
|---|---|---|
| Extended Probe Tip - 1/8 X 1", Threaded (3 x 25 mm) | 018-0000-2535-00 | Get a Quote |
| Extended Probe Tip - 1/4 X 1", Threaded (6 x 25 mm) | 018-0000-2531-00 | Get a Quote |
| Extended Probe Tip - 3/8 X 1", Threaded (9 x 25 mm) | 018-0000-2532-00 | Get a Quote |
| Extended Probe Tip - 5/8 X 1", Threaded (16 x 25 mm) | 018-0000-2533-00 | Get a Quote |
| Extended Probe Tip - 1 X 1", Threaded (25 x 25 mm) | 018-0000-2534-00 | Get a Quote |
| Extended Probe Tip - Base Assembly, Threaded | 025-0000-0654-00 | Get a Quote |
| Extended Probe Tip - Kit (1 Base & 5 Tips) | 025-0000-0655-00 | Get a Quote |
| Probe Tip Assembly, 1/8" diameter | 025-0000-0631-00 | Get a Quote |
| Probe Tip Assembly, 1/4" diameter | 025-0000-0631-01 | Get a Quote |
| Probe Tip Assembly, 3/8" diameter | 025-0000-0631-02 | Get a Quote |
| Probe Tip Assembly, 5/8" diameter | 025-0000-0631-03 | Get a Quote |
| Probe Tip Assembly, 1" diameter | 025-0000-0631-04 | Get a Quote |
| Extended Probe Tip - Kit (5 single piece assemblies) | 025-0000-0655-01 | Get a Quote |
Guarded Probe Tips
| Description | Part Number | |
|---|---|---|
| Guarded Probe Tip - 5/8" Dia. (16 mm) | 025-0000-0597-03 | Get a Quote |
| Guarded Probe Tip - 1.0" Dia. (25 mm) | 025-0000-0597-00 | Get a Quote |
| Guarded Probe Tip - 1.5" Dia. (38 mm) | 025-0000-0597-01 | Get a Quote |
| Guarded Probe Tip - 2.0" Dia. (52 mm) | 025-0000-0597-02 | Get a Quote |
Probe Holders
| Description | Part Number | |
|---|---|---|
| PB309B - Fixed Probe Holder | 025-0000-0640-00 | Get a Quote |
| Manual Swing-Away Probe Holder | 025-0000-0679-00 | Get a Quote |
| RP2 - Retractable Probe Holder | 025-0000-0573-00 | Get a Quote |