FLASH LITE 11
Discontinued

The Larson FLASH LITE 11 has all of the internal data gathering and control electronics of the standard FLASH testers.

See all features

Information

The Larson FLASH LITE 11 has all of the internal data gathering and control electronics of the standard FLASH testers.

The FLASH LITE 11 is a completely functional stand-alone tester. Basic controls are all machine mounted and the stand-alone tester can perform a complete range of tests.

Programmable Features

  • Up to 10 point test
  • Test types include: F@L, L@F, Preset, Free length, Peak, Rate and Initial Tension
  • Single test power off memory
  • Result and statistical printout
  • Conditional testing
  • Extension / compression testing
  • Force or length offset

Manual Controls
Go To Force, Go To Length and Jog control (F1, F2).

Smart Interchangeable Load Cells
Choose from eight smart interchangeable load cells for increased accuracy in your tests. The FLASH LITE will accommodate any number of our smart load cells.

Force Specifications

Load Cell
Capacity		 Standard Resolution
0-20% FS 20-100% FS
2 lb 0.0001 lb 0.001 lb
907 g 0.02 g 0.2 g
8.9 N 0.0002 N 0.002 N
11 lb 0.0002 lb 0.002 lb
5 kg 0.1 g 1 g
49 N 0.001 N 0.01 N
22 lb 0.0005 lb 0.005 lb
10 kg 0.2 g 2 g
98 N 0.002 N 0.02 N
66 lb 0.001 lb 0.01 lb
30 kg 0.5 g 5 g
294 N 0.005 N 0.05 N
110 lb 0.002 lb 0.02 lb
50 kg 0.001 kg 0.01 kg
489 N 0.01 N 0.1 N
200 lb 0.005 lb 0.05 lb
91 kg 0.002 kg 0.02 kg
890 N 0.02 N 0.2 N
550 lb 0.01 lb 0.1 lb
249 kg 0.005 kg 0.05 kg
2,447 N 0.05 N 0.5 N
1,000 lb 0.02 lb 0.2 lb
454 kg 0.01 kg 0.1 kg
4,448 N 0.1 N 1 N
Accuracy = ± Full Scale Resolution x 2

Parts and Accessories

Load Cells

DescriptionPart Number 
2 lb Smart Interchangeable Load Cell (1" Ø platform)025-0000-0535-00Get Quote
11 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-01Get Quote
22 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-02Get Quote
66 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-03Get Quote
110 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-04Get Quote
200 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-05Get Quote
550 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-06Get Quote
1000 lb Smart Interchangeable Load Cell (3.5" Ø platform)025-0000-0535-07Get Quote

Accuracy Options

DescriptionPart Number 
High Resolution Length025-0000-0455-00Get a Quote
High Stiffness 4.5" Stroke025-0000-0532-00Get a Quote

Accessories

DescriptionPart Number 
Thru-Rod Accessory Package (1/16, 3/32, 1/8, 3/16, 1/4" Ø)

Thru-Rod Accessory Package

Part Number: 025-0000-0500-00

If you have springs that tend to buckle like the one pictured above, our thru-rod package can help test these types of springs consistently and easily. Includes rods: 1/16, 3/32, 1/8, 3/16, 1/4″ x 6″ long, accompanying plates with matching holes, and upper and lower plates (no holes).

Installation and Use

025-0000-0500-00Get a Quote
Pin Extension Hook Set - 2 / 66 / 110 lb max (Fixed Mount)

Pin Extension Hooks

Part Number: 025-0000-0250-04

Light duty hooks for your extension testing. The above pictures show 025-0000-0250-05 (including the swivel mount).

025-0000-0250-04Get a Quote
Pin (Swivel Mount) and Wire Extension Hook Set - 2 / 10 / 66 / 110 / 1,000 lb

Wire Extension Hooks – 2 lb max (0.030″ Ø)

Part Number: 025-0000-0523-00

Medium duty hooks for extension testing. Protective carrying and storage case included.

025-0000-0523-00Get a Quote
Wire Extension Hook Set - 10 / 66 / 110 lb max

<p>

</p>
<h4>Wire Extension Hooks – 2 lb max (0.030″ Ø)</h4>
<p><strong>Part Number: 025-0000-0340-03</strong></p>
<p>Medium duty hooks for your extension testing.</p>

025-0000-0340-03Get a Quote
Machined Extension Hook Set - 110 / 750 lb max

Machined Extension Hook Set

Part Number: 025-0000-0183-01

Heavy duty hooks for your extension testing.

025-0000-0183-01Get a Quote
Wedge Grips 0-0.600" (1 Jaw / 2 Grip Sets)

Wedge Grips

Part Number: 025-0000-0428-02

Ideal for testing wires, strip material and plastic tape or films. Spring loaded jaws automatically close and tighten as tension is applied.

025-0000-0428-02Get a Quote
Wedge Grips 0-0.350" (1 Grip Set)

Wedge Grips

Part Number: 018-0000-1964-00

Ideal for testing wires, strip material and plastic tape or films. Spring loaded jaws automatically close and tighten as tension is applied.

018-0000-1964-00Get a Quote
Wedge Grips 0.250-0.600" (1 Grip Set)

Wedge Grips

Part Number: 018-0000-1971-00

Ideal for testing wires, strip material and plastic tape or films. Spring loaded jaws automatically close and tighten as tension is applied.

018-0000-1971-00Get a Quote
Wire Crimp Pull Fixture - Upper

Wire Crimp Pull Fixture – Upper

Part Number: 025-0000-0271-00

Test your wire crimp’s integrity with LSI’s wire crimp fixtures. The upper pull fixture features 18 slots ranging from 0.031″ to 0.437″ and can accommodate up to #4 gage wire. Choose between 110 and 1,000 lb lower grip fixtures.

025-0000-0271-00Get a Quote
Wire Crimp Grip Fixture - Lower 110 lb

Wire Crimp Pull Fixture – Lower

Part Number: 025-0000-0274-00

Test your wire crimp’s integrity with LSI’s wire crimp fixtures. The upper pull fixture features 18 slots ranging from 0.031″ to 0.437″ and can accommodate up to #4 gage wire. Choose between 110 and 1,000 lb lower grip fixtures.

025-0000-0274-00Get a Quote
Wire Crimp Grip Fixture - Lower 1,000 lb

Wire Crimp Pull Fixture – Upper

Part Number: 025-0000-0272-00

Test your wire crimp’s integrity with LSI’s wire crimp fixtures. The upper pull fixture features 18 slots ranging from 0.031″ to 0.437″ and can accommodate up to #4 gage wire. Choose between 110 and 1,000 lb lower grip fixtures.

025-0000-0272-00Get a Quote
Smooth Jaw Wire Chucks - 100 lb

Wire Chucks

Part Number: 025-0000-0193-00

For extension wire breakage testing: accepts 0.020″ to 0.312″ Ø wire.

025-0000-0193-00Get a Quote
Serrated Jaw Wire Chucks - 200 lb

Wire Chucks

Part Number: 025-0000-0193-01

For extension wire breakage testing: accepts 0.020″ to 0.312″ Ø wire.

025-0000-0193-01Get a Quote
Smooth Jaw Wire Chucks - 400 lb

Wire Chucks

Part Number: 025-0000-0193-02

For extension wire breakage testing: accepts 0.020″ to 0.312″ Ø wire.

025-0000-0193-02Get a Quote
Air Vibration Damping Feet (Set of 4)

Fatigue Plate Assembly

Part Number: 025-0000-0449-01

Air vibration damping feet make possible very accurate force measurements in normal industrial environments that have floor or building transmitted vibrations. These vibrations may be induced by industrial equipment, local vehicle or rail traffic, and, in some cases, people walking by. The feet attenuates the magnitude of the vibration by 10 to 100 times, making possible accurate force measurements at very light load levels in environments that make testing impossible. The feet should be considered for applications with forces less than 10 lbs. and is highly recommended at less than 2 lbs.

Vibration Damping Table Setup:

  • Mount Air Vibration Damping Feet to bottom of Flash 11 or 24 (Requires 4)
  • Fill with air
025-0000-0305-00Get a Quote
Foam Vibration Damping Pad

Vibration Damping Pad

Part Number: 025-0000-0226-00

Foam Vibration Damping Pad

025-0000-0227-00Get a Quote
Dust Cover

Dust Cover

Part Number: 059-1000-0008-00

059-1000-0008-00Get a Quote
TUL - Twist Under Load

Twist Under Load

Part Number: 050-0000-0099-00

Graduated Markers
The Twist Under Load has indicating marks that will measure the amount of twist in any given spring.

Capacity
From 10 to 2,000 lbs and up to 4″ Ø.

Captivated Ball Bearings
With lubricated ball bearings, this unit will rotate smoothly and with very light force.

Universal Mounting (excluding the Flash 11 & Flash 24)
Will mount to any Larson tester, or any tester with 5/16-18 mounting holes.

050-0000-0099-00Get a Quote

Output Options (RS 232)

DescriptionPart Number 
Inkjet Printer (Includes Cable / Adapter 025-0000-0458-00)

Inkjet Printer (Includes Cable / Adapter 025-0000-0458-00)

Part Number: 025-0000-0464-00

Inkjet printer prints single feed 8.5×11″ paper. Epson Stylus C88+ inkjet printer. Laser sharp text. If you wish to use your own printer with an RS 232 equipped product, you may choose to purchase only the Parallel to RS 232 Adapter Cable.

025-0000-0464-00Get a Quote